The system of automatic measurement of unedged sawn timber saves time for employees cubing on sheets or in the computer of unedged sawn timber. The board is transported longitudinally along a conveyor - ***** During the entire board travel, measurements are made at a frequency of about 5 Hz. After scanning the whole board, we have information about its width in several dozen places along the section of the whole board. These data can be used in many different ways - calculate the discovery in the middle, average it over the entire board, determine the board's convergence and its curvature. Information about the full shape of the discovery can also be helpful in controlling multi-saw. It is also possible to install the system on an existing conveyor. In addition, it is possible to measure the length and thickness of sawn timber. System functionality: - measurement of the discovery at a frequency of 5 Hz, - saving the full photo of the board to the database in a format such as jpg, - possibility of any interpretation of the discovery measurements along the entire length, - control of the straightness of the discovery - e.g. whether the saw saw did not cut the board in " boat. " System parameters: - maximum board width: 1000mm, - maximum conveyor speed 60 m / min, - discovery measurement accuracy (depending on the species) from 5 to 20mm, - length measurement accuracy from 10 to 30mm. - Translated with google