Ürün |
|
Kategori tipi | Masif ağaç, ahşap esaslı panel malzemeler ve plastik malzemelerin işlenmesi için |
---|---|
Kategori | Dairesel testere (Çift ve çoklu bıçak testereler) |
Marka | WALTER |
Model | WD 250/350 KBA |
Özellikler |
|
Öğenin Durumu | Kullanılmış |
Üretim tarihi | 2017 |
Hacim | 1 - 1 Dönüştürmek |
Tanım |
- reconditioned
- like new condition - year of manufacture 2017 TECHNICAL PARAMETERS: - the thickness of the slit prism 220 mm - width of the slit prism 600 mm - diameter of the spindle 70 mm - length of the spindle 550 mm - diameter of the discs 350 mm - engine upper 30 kW - motor bottom 37 kW - feed motor 2.2 kW - yield (8h) - 40 m3 - continuous regulation of the feed in the inverter - feed speed is 0-13 m / min - connection 3x400V Overall dimensions: - length of 360 cm - 155 cm width - height 180 cm - weight ~ 2900 kg The machine is used for cutting the planks and slats with prisms, and their thickness is determined by spacers between the saws. Saws both spindles operate in the same vertical plane, which enables the use of saws of smaller diameter and thickness. The unquestionable advantage of this type of solution is less kerf and thus reduce material and increase the productivity of the machine. Wielopiła duplex Type WD 250-350 KBA is used for cutting boards and strips of prisms. Thickness of the board and the strip is dependent on the spacers between saws, wherein the saw blade on both spindles operate in the same vertical plane, which enables the use of saws of smaller diameter and a thickness, the advantage of this type of solution is less kerf (reduction of losses of material and energy consumption ). Multisaws of this type are used in large industrial plants as well as in small craft shops involved in wood processing. |
Fiyat ve Koşullar |
|
Fiyat | talep üzerine |
Için Satıyor: | Dünya çağında |
By registering you agree to our General Conditions
Derecelendirme oluşturmak için kullandığımız bilgi türleri: