|Hacim||1 - 5000 parçalar Spot - 1 kez|
|Tanım||How to choice a proper sanding brush? several factors you have to taken in.
We believe,every application requires a certain brush,according client's wood products, offer each customer with the solution they need,please contact us for your quote.
The following factors within our consideration when choosing a sanding brush for our client:
Working on wood species.
When working on bare wood, needs to consider species of the wood piece.
Dense hardwoods like oak, maple, hickory, etc. will react differently to each abrasive grit when compared to softer hardwoods like alder, or white woods.
Also consider the stage in production and the results you want.
Do you need to remove knife marks left from your moulder,
do you need to prepare the work piece for finishing?
You must consider the type of finish used. Hard coatings will require different brushes than softer coatings, for one.
Depth of profile.
Brush sanding can be used to sand anything from a flat MDF panel to the most detailed linear moldings and entry doors. In general, the deeper the profile, the higher the trim length of your sanding brushes. Do not“overshoot”the trim length.
Detail of profile.
We account for the detail of your profile by using various sizes of flaps cut into the sandpaper. Typically a brush sanding head will have several different flap sizes so that all areas of your work piece will be sanded effectively.
Fiyat ve Koşullar
|Için Satıyor:||Macau, Brunei, Okyanusya, Malezya, Kamboçya, Kırgızistan, Antartika, Kuveyt, Afrika, Laos, Güney Amerika, Cocos Adaları, Lübnan, Kuzey Amerika, Christmas Adası, Avrupa, Bangladeş, Bahreyn, Moğolistan, Maldivler, Butan, İngiliz Hint Okyanus Bölgesi, Suudi Arabistan, Oman, Singapur, Nepal, Myanmar, Sri Lanka, Katar, Pakistan, Filipinler, Birleşik Arap Emirlikleri, Vietnam, Ermenistan, Özbekistan, Doğu Timor, Tayland, Tayvan, Tacikistan, Suriye, Türkmenistan, Türkiye, Hong Kong, Azerbaycan, Burma, İsrail, Yemen, Irak, İran, Endonezya, Hindistan, Güney Kore, Kuzey Kore, Kazakistan, Afganistan, Ürdün, Japonya|
Derecelendirme oluşturmak için kullandığımız bilgi türleri: